If you will be looking for mold professionals help, I want to make sure you have all the knowledge to know what to expect and how much the costs should be. We have a few guides that will help you get rid of your mold problem. But we also know about secrets from the professionals on how to get your mold bills covered by your insurance providers as well.
With that said, below is links to guides we have available. After you read those, be sure to read this page on exact procedures and other helpful information we can share with you.
Full Guide On Fixing Your Mold Problem:
Mold Remediation Companies - Guide to to explain how to Select and know the costs to expect for a mold job. Also a tid-bit on having your mold bill covered by insurance providers.
Mold Testing Companies – Guide on why mold testing is beneficial to you and how to get your mold remediation paid for, we will show you how.
Stop mold before it amplifies into a larger and more expensive problem then it already is using proven methods and solutions being used by professionals in the mold industry.
While most mold problems arise for a number of reasons. Their is a few procedures you will want to understand to prevent your mold problem from happening again and getting rid of the problem right away.
If your simply going to let the issue sit, be warned mold will only amplify faster and literally turn a simple mold problem into a $1,000 an hour problem.
By taking action today using one of the methods recommended below, you will avoid $1,000′s and be able to get your home in pristine condition.
Why You May Have Mold:
Well, moisture is a big cause of your mold problem. Either a leak happened, water seeped into the door, or the roof, tub, shower, water heater, or any other item is at fault. But how do know which is the problem?
Moisture Problems Arise From:
- A/C not being balanced and sweating
- A/C duct work being placed incorrectly
- Roof leak
- Water intruding into home
- Outdoor sprinklers hitting your wall consistently
- and many other
The Mold Inspection:
This is the 1st step the process. You must find out the source, this will prevent any future problems from coming back. I have seen so many times where mold sufferers pay someone to fix the problem, like a wet moldy carpet, but forget to solve the origin of the problem.
You will have a few options, when inspecting for mold.
2. Have a Mold Inspector Come Into Your Home
Regardless which you select, you will want to understand a bit of the process yourself. In most cases, you can find the source of your problem and save yourself $1,000′s of dollars from having a highly trained mold inspector come to your home and take air samples. This would be up to you and decided based on the extent of your mold problem.
Here are some helpful tips from the Mold Manuscript Inspection Procedures:
The Mold Manuscript helps professionals and people suffering with mold problems to go thru his 7 step course to not only inspect, but also remediate in an extremely affordable way. Below are the inspection tips given by Maurice himself to find your source of the mold problem.
Some Popular Problematic Locations:
- Perimeter Walls
- Carpeting (Pickup Carpet & Check Tack Strips)
Look for the following in these locations:
- Water damage or Water stains
- Warping of building material (wood framing, etc)
- Funky musty odors
- Mold stains
Try to locate the source, for example… let’s say water stains. You need that if you see water stains around the window sill or around it, this simply means you may need caulking.
But… water seeps down, so you may need to investigate the area below.
As for carpeting… if you have a carpet adjacent adjacent to a door which allows water intrusion, you could be in a huge surprise when you pick up the carpeting. The tack strips may be rotted and full of mold. If they are… ask why? Most likely, water intrusion from the front door is your problem. These scenario’s are all explained and given in a unique way with the mold manuscript, so no situation is left unsolvable. Everything has a solution.
Every location is different, but once you understand the process, it’s not difficult to find the source of your mold problem.
Next… Is Your Mold Removal Procedures:
After location the source, we now can learn about correct mold remediation procedures. The method is not difficult and most mold sufferers have fixed their mold problem within anywhere from a day to 3 days understanding the correct mold remediation procedures.
You will have 2 options in doing a mold remediation:
2. Have Mold Remediation Expert Do It For You
To do it yourself, it can be more affordable and not difficult what so ever, due to new innovative products. Now since released to the public, products like Safe Shield and Molderizer are being used everywhere.
The natural mold remediation products are used by professionals because not only are that a green mold cleaner that kills mold. But the innovative formula that creates a barrier on building materials, which had mold previously are covered. This prevents any future mold amplification in the future. Which has never been done by any mold product out their.
Below Is The Process of Removing Mold:
Depending on the damage, sometimes just a simple spray down with Molderizer and Safe Shield should be fine for most mold problems. If the problem has spread, below is the procedure you would want to look into.
- Contain The Area
- Remove All Wet Building Materials(Drywall, Carpeting, etc)
- Dispose Materials 5 ft from last visible trace
- Remove any wet carpeting 5 ft from last visible trace
- Dispose wet building materials in garbage bag (Seal with Tape)
- Clean Areas with Safe Mold Protectant and Natural Cleaners
- Heppa Vac / Filter Mold Spores While Working In Room
- Filter out spores in the work area using Heppa Vac
These are some of the basics, the Mold Manuscript goes into more detail on easily getting rid of your own mold problem. The methods are outlines very clearly using Maurice’s 7 Step Procedure and practiced by mold professionals all over the United States.
Your Last Steps
Now that you’ve learned some of the steps and methods, you will want to make a decision to avoid any serious future amplification of mold.
Don’t let your mold problem slip away and cost you much more in the future.
Below is some alternatives to help you with your mold problem:
Get A Quote From a Reputable Mold Professional
When working with home improvement in order to survive, it is important that you have ALL of the knowledge you need about home improvement before you jump into the job market. This is because, if you are on a job that someone expects you to be able to do and you can’t complete it or are taking too long, this will cost you in the long run.
When working on a home improvement project, it is always important to be flexible with your time and money. If you think you can finish a project in two weeks, plan for it to take three or four weeks. Also, make sure your budget is a little larger than you expect the job to cost you.
Remove the clutter from your home and it will give you the feel of a new room without the expense of remodeling it. If you have broken or unused items around the home, get rid of it. There is no need to hold onto things that you do not use or need.For an easy way to update your home, consider covering dated popcorn ceilings with plaster. All you need is a bucket of joint compound, a wide putty knife for spreading the mud, and plenty of patience. You can create a smooth surface over the popcorn or get creative with the way you apply the mud, and you can paint over the plaster for a modern look.
Sealing air leaks is an inexpensive way to improve the energy efficiency of your home. Unsealed cracks and openings are one of the leading causes of heat loss in the average home. Common problem areas include around doors and windows, around pipes, wires and ducts that lead outdoors and around recessed light fixtures. Use caulk to seal small cracks and expanding spray foam for larger gaps and openings.
Using wheat board is a way to have cabinets made that are great for the environment. There is also wood that is certified as sustainable but is of exactly the same quality as all other types of wood. Composite wood is not a good choice as it releases harmful chemicals into the air.
Do not invest in fitted furniture unless you are sure that you will not want to sell your house in the future. Although fitted furniture can look really stylish and be a great way to get a lot of extra storage space, it is expensive and you can not take it with you when you move out of your house.
Paint your garage floor with an epoxy coating for a professional-looking surface that cleans up with ease. While the process requires several steps and a few days to cure and harden, the results are worth it. The epoxy coating will resist stains from oil and dirt, and spills will wipe up with ease.
Displaying buttons on a spice rack can be a great way to give your home a cottage style feel, as well as, making a focal point in your living room. Buy some small old fashioned apothecary jars and fill them with buttons assorted by color. Arrange them in a pleasing manner on your spice rack and you have yourself, a great focal point.
A basic handyman’s toolbox should contain the following things: hammer, nails, adjustable wrench, vice grips, one interchangeable head screwdriver, a set of Alan wrenches, 3 and 1/2 inch screws, a drill, glue or epoxy putty, a metal file and/or sandpaper, and a handyman belt. These essentials will get you through most basic jobs.
Be aware of the type of product you are using to clean out stubborn clogs. Not all cleaners are made the same and some are extremely harsh. Avoid using crystallized drain cleaners as they can stick to your pipes and cause continuous damage. Make sure you use a drain cleaner that is compatible with your septic tank.
The canny homeowner pays for quality, not name recognition when buying home improvement materials. Many expensive fixtures and fittings cost so much because they have recognizable brand names and fancy styling. Other fixtures are expensive because they are exceptionally durable and well-made. Learning to spot the difference and spending money on the latter is the way to get the most out of a home improvement budget.
If your kitchen is looking old and worn down, you should try putting a new sink in. A new sink will make your home look instantly better. New sinks come in a variety of fresh colors, giving you the opportunity to add a touch of color to your kitchen.
Switch out your cupboard doors! OK, we all can’t afford new cabinets. If we just change out the doors, however, we get a new look for a very reasonable price. Just make sure you carefully measure to determine what you need before you take the plunge. Installation is easy. Just screw them in place!
Take pride and joy in your work while trying to enjoy yourself. As long as you keep safety in mind, have fun remodeling your house. If you have a positive outlook while making home improvements, you are more likely to stick with your goals and get the work completed in a timely manner.
There are few tasks more satisfying than improving your home. Each improvement brightens your day or makes everyday life easier. You will be proud when friends or relatives visit and notice what you have done. So why not find a little time to carry out one or two of the suggestions that you’ve just read about? You’ll be glad that you did.